Simple jig for kerfing lining. The aluminum index is backed with a spring from a ball point pen and moves into the wood block when advancing the lining into the saw blade. No high tech stuff here............!!!
Tom
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Reverse kerfed lining jig http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=42016 |
Page 1 of 1 |
| Author: | Tom West [ Fri Nov 22, 2013 6:02 pm ] |
| Post subject: | Reverse kerfed lining jig |
Simple jig for kerfing lining. The aluminum index is backed with a spring from a ball point pen and moves into the wood block when advancing the lining into the saw blade. No high tech stuff here............!!! Tom |
|
| Author: | Trevor Gore [ Fri Nov 22, 2013 7:23 pm ] |
| Post subject: | Re: Reverse kerfed lining jig |
Neat and simple, Tom. Nice! Is it stable enough to go double height then slit down the middle? |
|
| Author: | Tom West [ Fri Nov 22, 2013 8:18 pm ] |
| Post subject: | Re: Reverse kerfed lining jig |
Trevor: Have never thought of doing that. But I think it would be OK. Tom |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|